Hydraulic press HIDROGARNE mod. Four-column MV-1000E CNC with a power of 1000 Tn synchro-electronics. Specially designed for pre-series adjusting and pre-series in progressive die-casting for the automotive sector, with a 4,750 x 2,250 mm die-casting capacity, ready to link to an automatic power line.
DESCRIPTION
- Six double acting hydraulic cylinders of 167 TN.
- Four compensators of 50 tons.
- Bottom slotted table in “T” according to user instructions.
- Top slotted table in “T” with fall protection system.
- Useful surface tables 4,750 x 2,250 mm.
- Structure prepared to support 600 tons of effort concentrated in 1/3 of its surface.
- Columns with 250mm diam. rectified and chromed.
- Hydraulic unit of 1 variable speed controlled by proportional flow valve, with automatic shut-off of the pre-filling speed and independent operation, equipped with a decompression system and pre-filling valves with proportional pressure and optical rules for table movement control superior and synchronous electronic offset compensation system.
- Electrical installation for operation at 1 or 2 forward speeds of the main cylinder.
- The press has a manual cycle and an automatic cycle (by means of selector with test key):
- The manual cycle allows the execution of all movements (step by step) of the press at a slow speed.
- The automatic cycle allows the press to carry out a complete production cycle.
- Electrical safety system for the fall protection system of the upper table.
- Lower table with hydraulic extraction and to stuck by physical stops.
- The machine has a control panel where the data can be entered using the keyboard and can be visualized using an easy-to-read liquid crystal display.
- The press will be controlled by means of a mobile keyboard with low voltage maneuver by means of a simultaneous two-hand push-button with level IV safety (in accordance with regulation 98/37 CE).
- 2 optical barriers, level IV of 1,000 mm installed in the area of the operator and also in the rear.
- Electrical parts are manufactured in accordance with current legislation and with IP55 protections.
- Press certified in accordance with the European Machinery Safety Directive 2006/42 / EEC.
TECHNICAL FEATURES
| Power | 125 TN a 1.000 TN. |
| Opening power | 100 TN. |
| Motorized speed | 1 |
| Motor power | 75 kw |
| Pressure | 260 bar |
| Pre-filled fast speed . | 150 mm/s. |
| Variable work speed | 12-4 mm/s. |
| Return speed | 60 mm/s. |
| Piston stroke | 1000 mm. |
| Free height between plates | 1.500 mm. |
| Useful dimensions of tables | 4.750 x 2.250 mm. |
| Bottom table desplacement | 2.200 mm. |
| Between tables | 5.600 x 1.490 mm. |
| Total dimensions | 6.700 x 5.000 mm. |
| Altura total total height | 7.400 mm. |
| Weight | 154.000 Kg. |
