Skip to main content

HYDRAULIC PRESS FOR ADJUSTMENT AND TESTING OF MOLDS, DIES, AND TOOLINGMOLDES, MATRICES Y TROQUELES

The MV-800E/NC-SINCRO hydraulic press belongs to the M/NC series and is custom-designed for the adjustment and testing of molds, dies, and punches.

It features four rectified and chrome-plated cylindrical columns with protective bellows, 250 mm in diameter, made of C45E steel, specially manufactured to ensure optimal performance.

It utilizes an optimized hydraulic system with a pressure of up to 250 Bar, ensuring prolonged durability and reliability.

It meets and satisfies all essential safety and health requirements according to CE regulations.

MORE INFORMATION

STRUCTURE AND TABLES

  • Structure designed to support 600 TN of concentrated force on 1/3 of its surface.
  • Lower table with T-slots as per user specifications.
  • Upper table with T-slots and anti-fall safety system.
  • Useful surface of the tables: 3,000 x 2,000 mm.

CYLINDER AND HYDRAULIC GROUP

  • Two double-acting hydraulic cylinders with 400 TN each.
  • Single-speed hydraulic group with automatic disconnection of the pre-filling speed and independent operation, equipped with a decompression system and proportional pressure pre-filling valves. Features digital potentiometers on the upper table for displacement control and a synchro-electronic system for compensating off-center or unbalanced forces.
  • All M/NC series hydraulic presses include a lateral pressure switch to regulate the most suitable pressure setting for each type of work.
  • Glycerin manometer with tonnage reading.

ELECTRICAL INSTALLATION AND SAFETY

  • Electrical installation for operation at 1 or 2 speeds of the main cylinder advance.
  • The press has a manual cycle and an automatic cycle (activated via a test key selector):
    • The manual cycle allows for the execution of all movements (step-by-step) of the press at a slow speed.
    • The automatic cycle allows the press to perform a full production cycle.
  • Electrical safety system for the anti-fall system of the upper table.
  • Lower table with hydraulic extraction and physical stops for parking.
  • The machine features a control panel with a touchscreen display for entering operating and calibration data.
  • 2 optical barriers of 1,000 mm with level IV safety installed at the front and rear.
  • Siemens electrical components are manufactured according to current CE regulations and legislation with IP55 protection.
  • Electrical and hydraulic operations are redundant and self-controlled. Includes an additional safety block and self-control devices for operation and safety. Includes verification and certification of proper operation and safety distance for photoelectric cells.
  • For safety, it includes a laser and area protection with level IV photoelectric barriers.

TECHNICAL SPECIFICATIONS

MODEL MV-800E/NC-SINCRO
Power tn 800
Opening Force tn 80
Powered Speeds 1
Engine Power kW 55 + 55
Auxiliary Motor Power cv 75 + 75
Piston Stroke kW 5.3
Fast Pre-Fill Speed mm 1.000
Working Speed mm/s 110
Return Speed mm/s 6
Guide Diameter mm/s 180
Maximum Pressure mm 250
Useful Table Area Bar 250
Lower Table Displacement mm 3.500 x 2.000
Between Columns mm 2.000
Vertical Light mm 3.100 x 1.300
Total Front mm 1.500
Total Lateral mm 3.800
Total Height mm 4.500
Weight mm 6.400
Power kg 134.600

    Anfrage stellen