The CM-150E/NC c-frame hydraulic press belongs to the CM/NC series and is custom-designed for medium production cold stamping operations.
It features an upper table and a lower table made of C45E steel, both machined with 2 T-slots DIN-650.
It uses an optimized hydraulic system with a pressure of 305 Bar, ensuring prolonged durability and reliability in its performance.
It meets and satisfies all essential safety and health requirements according to CE regulations.
MORE INFORMATION
STRUCTURE AND TABLES
- Features an electrowelded c-frame structure made exclusively from S355JR steel.
- Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision.
- Calculated and designed with finite element software.
CYLINDER AND HYDRAULIC GROUP
- Main single-acting cylinder and 2 lateral cylinders for rapid approach with lapped sleeve, chrome-plated piston, and maintenance-free anti-wear guides.
- Motorized hydraulic group with two speeds and automatic disconnection of the rapid speed.
- Quiet DENISON-PARKER hydraulic pump.
- Air-oil cooler.
- REXROTH cylinder decompression valve.
- REXROTH proportional pressure and control solenoids.
- EQUIBERMA pre-filling valve.
- Glycerin manometer with tonnage reading.
ELECTRICAL INSTALLATION AND SAFETY
- The electrical panel includes an NC that allows programming of the type of work to be performed in manual or automatic mode at approach speed or working speed, and the most suitable pressure.
- SCHNEIDER safety module.
- Emergency stop „Z“.
- Electrical panel with IP-55 rating.
- For safety, it includes category IV photoelectric barriers located in the front work area and two hinged lateral guards.
TECHNICAL SPECIFICATIONS
| MODEL | CM-150E/NC | |
| Power | tn | 150 |
| Engine Power | hp | 15 |
| Notch | mm | 375 |
| Working Speed | mm/s | 6 |
| Approach Speed | mm/s | 160 |
| Return Speed | mm/s | 110 |
| Maximum Pressure | Bar | 305 |
| Piston Stroke | mm | 250 |
| Lower Table | mm | 900 x 650 |
| Upper Table | mm | 700 x 450 |
| Maximum Vertical Clearance | mm | 600 |
| Working Height | mm | 950 |
| Total Front | mm | 1.600 |
| Total Side | mm | 955 |
| Total Height | mm | 2.900 |
| Weight | kg | 4.150 |
