Skip to main content

Hydraulic press HIDROGARNE mod. Four-column MV-1000E CNC with a power of 1000 Tn synchro-electronics. Specially designed for pre-series adjusting and pre-series in progressive die-casting for the automotive sector, with a 4,750 x 2,250 mm die-casting capacity, ready to link to an automatic power line.

DESCRIPTION

  • Six double acting hydraulic cylinders of 167 TN.
  • Four compensators of 50 tons.
  • Bottom slotted table in “T” according to user instructions.
  • Top slotted table in “T” with fall protection system.
  • Useful surface tables 4,750 x 2,250 mm.
  • Structure prepared to support 600 tons of effort concentrated in 1/3 of its surface.
  • Columns with 250mm diam. rectified and chromed.
  • Hydraulic unit of 1 variable speed controlled by proportional flow valve, with automatic shut-off of the pre-filling speed and independent operation, equipped with a decompression system and pre-filling valves with proportional pressure and optical rules for table movement control superior and synchronous electronic offset compensation system.
  • Electrical installation for operation at 1 or 2 forward speeds of the main cylinder.
  • The press has a manual cycle and an automatic cycle (by means of selector with test key):
  • The manual cycle allows the execution of all movements (step by step) of the press at a slow speed.
  • The automatic cycle allows the press to carry out a complete production cycle.
  • Electrical safety system for the fall protection system of the upper table.
  • Lower table with hydraulic extraction and to stuck by physical stops.
  • The machine has a control panel where the data can be entered using the keyboard and can be visualized using an easy-to-read liquid crystal display.
  • The press will be controlled by means of a mobile keyboard with low voltage maneuver by means of a simultaneous two-hand push-button with level IV safety (in accordance with regulation 98/37 CE).
  • 2 optical barriers, level IV of 1,000 mm installed in the area of the operator and also in the rear.
  • Electrical parts are manufactured in accordance with current legislation and with IP55 protections.
  • Press certified in accordance with the European Machinery Safety Directive 2006/42 / EEC.

TECHNICAL FEATURES

Power 125 TN a 1.000 TN.
Opening power 100 TN.
Motorized speed 1
Motor power 75 kw
Pressure 260 bar
Pre-filled fast speed . 150 mm/s.
Variable work speed 12-4 mm/s.
Return speed 60 mm/s.
Piston stroke 1000 mm.
Free height between plates 1.500 mm.
Useful dimensions of tables 4.750 x 2.250 mm.
Bottom table desplacement 2.200 mm.
Between tables 5.600 x 1.490 mm.
Total dimensions 6.700 x 5.000 mm.
Altura total total height 7.400 mm.
Weight  154.000 Kg.

Leave a Reply

Hidrogarne
Datenschutz-Übersicht

Diese Website verwendet Cookies, damit wir dir die bestmögliche Benutzererfahrung bieten können. Cookie-Informationen werden in deinem Browser gespeichert und führen Funktionen aus, wie das Wiedererkennen von dir, wenn du auf unsere Website zurückkehrst, und hilft unserem Team zu verstehen, welche Abschnitte der Website für dich am interessantesten und nützlichsten sind.