Skip to main content

The hydraulic press HIDROGARNE E model RM- 80 has a power output of 80Tn, belongs to HIDROGARNE R serie and, in this case, it’s optimized for deep drawing or stamping with the following adaptations:

  • Hydraulic cushion of 25Tn of power output placed in the bottom table with 12 candles
  • Hydraulic ejector of 2Tn with a lift of 25mm in the upper table
  • Aproximation speed of 100 mm/sec
  • Working speed: 12 mm/sec
  • Return speed: 160 mm/sec
  • Working press: 235 bar

Its main features are:

  • Sturdy construction with closed sides.
  • Main Cylinder of single acting with 80 tons includes pre -filled valve.
  • 2 side cylinders for approach and quick return.
  • Top table with four guides Ø 50 mm with bimetallic antifriction sockets of maintenance free.
  • upper and lower tables with machined “ T“ slots of M16 x 18
  • Hydraulic cushion placed at the lower table with 12 candles Ø 30
  • Hydraulic ejector of 2 tons and a stroke of 25 mm placed at the upper table
  • Hydraulic unit located on the top rear.
  • Electric panel located on the right side.
  • Limit switches located on the Left Side
  • Three adjustable strokes ending for the upper table, two to adjust the table stroke and one to change the speed.
  • Two stroke endings for the cushion, 2 limit switches in the pad, to forward and reverse.
  • Pressure switch for end of cycle.
  • Selector 1 or 2 speeds.
  • Selector for manual or automatic cycle.
  • Selector for the annulment of the hydraulic cushion.
  • Selector for the annulment of the hydraulic ejector.

Hydraulic group

  • DENISON-PARKER pump.
  • HITOS pressure and manoeuvre electro valves
  • Gauges tonnes.
  • Front pressure regulator
  • Pressure regulator for the cushion.
  • Air-oil cooler.

Safety

  • Security module for bimanual and emergency stop.
  • Reset button.
  • Emergency stop type „Z“ with latching
  • Back protections with security opening

General features

  • POWER 80 Tn
  • MAXIMUM LIGHT BETWEEN TABLES 400 mm
  • CYLINDER STROKE 250 mm
  • DIMENSIONS LOWER TABLE 700 x 500 mm
  • DIMENSIONS UPPER TABLE 600 X 450 mm
  • FRONTAL LIGHT 800 mm

Main cylinder

  • APPROACH SPEED 120 mm./seg.
  • WORKING SPEED 12 mm./seg.
  • RETURN SPEED 150 mm./seg.
  • WORKING PRESSURE 256 Bar

Cushion

  • POWER 20 Tn.
  • DIAMETER CANDLES / NO CANDLES Ø 30 MM / 6
  • EJECTOR STROKE 250 mm.
  • MAXIMUM PRESSURE OF CUSHION 160 Bar

Hydraulic group features

  • Decompression by timed valve
  • Safety block anti-fall.
  • Suction filter and return.
  • Oil level with thermometer.
  • Denison silent pump
  • MOTOR POWER 15 KW
  • TOTAL OIL CAPACITY 150 L
  • WORKING HEIGHT mm. 900
  • WEIGHT Kg. 3.500

Leave a Reply

Hidrogarne
Datenschutz-Übersicht

Diese Website verwendet Cookies, damit wir dir die bestmögliche Benutzererfahrung bieten können. Cookie-Informationen werden in deinem Browser gespeichert und führen Funktionen aus, wie das Wiedererkennen von dir, wenn du auf unsere Website zurückkehrst, und hilft unserem Team zu verstehen, welche Abschnitte der Website für dich am interessantesten und nützlichsten sind.