The MV-1000E/NC-SINCRO hydraulic press belongs to the M/NC series and is custom-designed for the adjustment of progressive dies.
It features a tilting upper table and a movable lower table made of C45E steel, machined with DIN-650 T-slots to ensure minimal friction in the vertical movement of the upper table. This is achieved through the installation of maintenance-free bimetallic bushings and perfect parallelism ensured by four high-mechanical-resistance cylindrical columns of 300 mm in diameter, chrome-plated and rectified.
It uses an optimized hydraulic system with a pressure below 290 Bar, ensuring prolonged durability and reliability.
It meets and satisfies all essential safety and health requirements according to CE regulations.
MORE INFORMATION
STRUCTURE AND TABLES
- Features a structure made from oxy-cut steel divided into three electro-welded monoblocks, exclusively manufactured from S355JR steel.
- Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision.
- Calculated and designed with finite element software.
- Cylindrical columns with a diameter of 300 mm, high mechanical resistance, rectified, and chrome-plated to maintain a low friction and wear coefficient.
- Upper table with T-slots and anti-fall safety system.
- Useful table surface: 4,750 x 2,250 mm.
- Structure designed to support 600 TN of concentrated force on 1/3 of its surface.
- Lower table designed to support up to 50 TN in displacement, supported by bronze guides with graphite load and mechanical positioning centers for precise table positioning.
CYLINDER AND HYDRAULIC GROUP
- 6 single-acting cylinders with lapped sleeves, chrome-plated pistons, and anti-wear guides.
- Four 50 TN hydraulic compensators located at the ends of the lower table.
- 800-liter hydraulic group with a silent Denison pump, automatic disconnection of the fast approach pre-filling speed, and equipped with a decompression system in working speed.
- Proportional pressure system and optical gauges for displacement control on the upper table, with a synchro-electronic system for compensating off-center or unbalanced forces.
- Hydraulic group cooling system with an independent air-oil radiator unit.
- All M series hydraulic presses include a lateral pressure switch to adjust the most suitable pressure setting for each type of work.
- Glycerin manometer with tonnage reading.
ELECTRICAL INSTALLATION AND SAFETY
- Includes a SIEMENS safety PLC model SIMATIC S7 1200 and a 12” touchscreen. Allows programming of semi-automatic and automatic operating modes, power, travel, and upper table dwell time. Capable of storing 300 recipes, with each recipe able to program all the above values.
- Low voltage operation via two-hand pushbutton.
- Anti-fall safety system with hydraulic safety jaws.
- Level IV photoelectric barriers installed at the front and rear.
- Lateral protections with opening and safety microswitches.
TECHNICAL SPECIFICATIONS
| MODEL | MV-1000E/NC-SINCRO | |
| Power | tn | 125 – 1000 |
| Opening Force | tn | 100 |
| Powered Speeds | 1 | |
| Engine Power | kW | 75 |
| Fast Pre-Fill Speed | mm/s | 100 |
| Variable Working Speed | mm/s | 12-4 |
| Return Speed | mm/s | 60 |
| Guide Diameter | mm | 300 |
| Maximum Pressure | Bar | 290 |
| Useful Table Area | mm | 4.750 x 2.200 |
| Lower Table Displacement | mm | 2.200 |
| Vertical Travel of Upper Table | mm | 800 |
| Between Columns | mm | 5.000 x 1.490 |
| Total Front | mm | 6.000 |
| Total Side | mm | 4.750 |
| Total Height | mm | 7.000 |
| Weight | kg | 150.000 |
