Skip to main content

The hydraulic press HIDROGARNE E model RM- 130 has a power output of 130Tn, belongs to HIDROGARNE R serie and, in this case, it’s optimized for deep drawing or stamping with the following adaptations:

  • Hydraulic cushion of 25Tn of power output placed in the bottom table with 12 candles
  • Hydraulic ejector of 2Tn with a lift of 25mm in the upper table
  • Aproximation speed of 100 mm/sec
  • Working speed: 12 mm/sec
  • Return speed: 160 mm/sec
  • Working press: 235 bar

Its main features are:

  • Sturdy construction with closed sides.
  • Main Cylinder of single acting with 130 tons includes pre -filled valve.
  • 2 side cylinders for approach and quick return.
  • Top table with four guides Ø 50 mm with bimetallic antifriction sockets of maintenance free.
  • upper and lower tables with machined ” T” slots of M16 x 18
  • Hydraulic cushion placed at the lower table with 12 candles Ø 30
  • Hydraulic ejector of 2 tons and a stroke of 25 mm placed at the upper table
  • Hydraulic unit located on the top rear.
  • Electric panel located on the right side.
  • Limit switches located on the Left Side
  • Three adjustable strokes ending for the upper table, two to adjust the table stroke and one to change the speed.
  • Two stroke endings for the cushion, 2 limit switches in the pad, to forward and reverse.
  • Pressure switch for end of cycle.
  • Selector 1 or 2 speeds.
  • Selector for manual or automatic cycle.
  • Selector for the annulment of the hydraulic cushion.
  • Selector for the annulment of the hydraulic ejector.

Hydraulic group

  • DENISON-PARKER pump.
  • REXROTH pressure and manoeuvre electro valves
  • Gauges tonnes.
  • Front pressure regulator
  • Pressure regulator for the cushion.
  • Air-oil cooler.

Safety

  • Security module for bimanual and emergency stop.
  • Reset button.
  • Emergency stop type „Z” with latching
  • Back protections with security opening

General features

  • Power 130 Tn
  • Maximum light between tables 700 mm
  • Cylinder stroke 350 mm
  • Dimensions lower table 750 x 550 mm
  • Dimensions upper table 650 X 500 mm
  • Frontal light 800 mm

Main cylinder

  • Approach speed 110 mm./seg.
  • Working speed 12 mm./seg.
  • Return speed 160 mm./seg.
  • Working pressure 256 Bar

Cushion

  • Power 25 Tn.
  • Diameter candles/ # candles Ø 30 MM / 6
  • Ejector cushion 250 mm.
  • Maximum pressure of cushion 160 Bar

Hydraulic group features

  • Decompression by timed valve
  • Safety block anti-fall.
  • Suction filter and return.
  • Oil level with thermometer.
  • Denison silent pump
  • Motor power 15 KW
  • Total oil capacity 150 L
  • Working height 950mm
  • Weight 3.950Kg
[space height=20]

Leave a Reply