The RM-1000E rigid arch hydraulic press belongs to the R series and is custom-designed for cold stamping work.
It features a top table and a bottom table made of C45E steel.
The press consists of an electrowelded structure made exclusively of S355JR steel. It is stabilized and machined after the structural welding process, with a top table equipped with four guides with maintenance-free antifriction bushings to ensure perfect parallelism and precision, calculated and designed using finite element software.
It uses an optimized hydraulic system with a pressure of less than 290 Bar, thus ensuring long-lasting durability and reliability in performance.
It meets and satisfies all essential safety and health requirements according to CE regulations.
MORE INFORMATION
STRUCTURE AND TABLES
- Rigid structure with closed sides, stabilized and machined after the welding process, and constructed from ST-52/3.
- Top table made of C45E with dimensions of 1,450 x 900 mm and T-slots.
- Fixed, highly robust base designed to withstand extreme forces well above its nominal rating.
- Bottom table made of C45E with dimensions of 1,450 x 960 mm and T-slots.
- Limit switches installed on the right side for adjusting the upper and lower strokes and for speed changes.
CYLINDER AND HYDRAULIC GROUP
- Two 500 Tn cylinders each and 4 cylinders for rapid advance.
- Motorized hydraulic group with 1 speed and pre-filling valves for rapid approach of the top table.
- Main motor of 38 kW.
- DENISON-PARKER gear pump.
- Forced cooling system with Air-Oil radiator.
- BOSCH REXROTH pressure and control solenoid valves.
- Rapid system with BOSCH REXROTH pre-filling valves.
- Maximum pressure switch for reverse maneuver or end of cycle.
ELECTRICAL INSTALLATION AND SAFETY
- 800 mm level IV photoelectric barriers.
- Two-hand operation with level IV safety module.
- Selector for manual or automatic operation, at 1 or 2 speeds.
- Ton gauge.
- Front maximum pressure regulator with ton gauge.
TECHNICAL SPECIFICATIONS
| MODEL | RM-1000E | |
| Power | tn | 1000 |
| Motor Power | kW | 38 |
| Working Speed | mm/s | 4 |
| Approach Speed | mm/s | 60 |
| Return Speed | mm/s | 90 |
| Maximum Pressure | Bar | 290 |
| Bottom Table | mm | 1.450 x 960 |
| Top Table | mm | 1.450 x 900 |
