The RM-80E rigid frame hydraulic press belongs to the R series and is custom-designed for specific deep drawing applications.
Equipped with an upper table and a lower table made of C45E steel.
It consists of an electrowelded structure made exclusively of S355JR steel. It is stabilized and machined at the end of the welding process, with an upper table featuring four guides with maintenance-free anti-friction bushings to ensure perfect parallelism and precision, calculated and designed using finite element software.
It uses an optimized hydraulic system with a pressure of 260 Bar, thus ensuring prolonged durability and reliability in its performance. It meets and satisfies all essential safety and health requirements according to CE regulations.
MORE INFORMATION
STRUCTURE AND TABLES
- Rigid structure with closed sides.
- Upper table with four guides of Ø 50 mm in diameter with maintenance-free bimetallic anti-friction bushings to ensure perfect parallelism.
- Lower and upper tables with M16 x 18 machined „T” slots.
- Hydraulic cushion housed in the lower table with 12 candles of Ø 30.
- 2 Tn ejector with a 25 mm stroke on the upper table.
CYLINDER AND HYDRAULIC UNIT
- Main single-acting cylinder of 80 Tn, with pre-filling valve.
- 2 side cylinders for fast approach and return.
- Hydraulic unit located at the top rear.
-
- Silent DENISON-PARKER vane pump.
- HITOS brand pressure and control solenoid valves.
- Ton-marked pressure gauges.
- Maximum pressing pressure adjustment on the front of the press.
- Cushion pressure regulator with ton-marked gauge.
- Air-oil cooler.
- Timed solenoid valve decompression.
- Anti-fall safety block.
- Suction and return filter.
- Oil level with thermometer.
ELECTRICAL INSTALLATION AND SAFETY
- Electrical panel located on the right side.
- Limit switches located on the left side.
- 3 adjustable limit switches on the upper table: maximum up, speed change, and maximum down.
- 2 limit switches on the cushion: forward and reverse.
- Pressure switch for end of cycle.
- Selector: 1 or 2 speeds.
- Selector: manual or automatic cycle.
- Selector: hydraulic cushion override.
- Selector: hydraulic ejector override.
- Two-hand button operation synchronized with safety module and „Z” emergency stop.
- Safety
- Safety module for two-hand operation and emergency stop.
- Reset button.
- „Z” emergency stop with interlock.
- Rear protection with safety opening.
TECHNICAL SPECIFICATIONS
Hydraulic Cushion
- Power: 20 Tn
- 12 candles of 30 mm diameter.
- Ejector stroke: 250 mm
- Maximum cushion cylinder pressure: 160 bar
Total oil capacity: 150 liters
| MODEL | RM-80E | |
| Power | tn | 80 |
| Motor power | hp | 20 |
| Working speed | mm/s | 12 |
| Approach speed | mm/s | 120 |
| Return speed | mm/s | 150 |
| Maximum pressure | Bar | 256 |
| Piston stroke | mm | 250 |
| Lower table | mm | 700 x 500 |
| Upper table | mm | 600 x 450 |
| Max. vertical clearance between tables | mm | 400 |
| Front clearance (Distance between uprights) | mm | 800 |
| Working height | mm | 900 |
| Height | mm | 2.650 |
| Weight | kg | 3.500 |
